Chapter 1 – AT Commands, S-Registers, and Result Codes
+ES
Description:
Syntax:
Values:
Reports :
Result Codes:
+ESA
Description:
Syntax:
Values:
Error Control Selection
Use this command to select the error correction mode. If the modem is operating in
V.80 mode (synchronous buffered mode), and +ES=,,8, the +ES? will always return
+ES: 6,,8 . The setting of this command overwrites the \N command, and the +ES
command is overwritten by the setting on a \N command.
AT+ES=<orig_rqst>,<orig_fbk>,<ans_fbk>
Values Combination Mode
+ES=1,0,1 Buffered mode
+ES=0,1,0 Direct mode
+ES=4,4,6 MNP or disconnect mode
+ES=3,3,5 LAPM or disconnect mode
+ES=4,0,6 MNP or buffered mode
+ES=3,0,2 LAPM, MNP, or buffered mode (Default)
+ES=2,0,2 LAPM or buffered mode
+ES=3,2,4 LAPM, MNP, or disconnect mode
+ES=,,8 V.42 sync buffer mode (V.80 enabled)
+ES=6,,8 V.42 sync buffer mode (V.80 enabled)
+ES? Reports current or selected options.
+ES=? Reports supported options.
OK
ERROR
Set Up Error Control Parameters
Sets the control parameters for the DCE in Synchronous Access Mode.
AT+ESA=<trans_idle>,<frame_idle>,<crc_type>,<nrzi_en>
Values Combination Meaning
+ESA=0,,,,0,0,, Disables CRC generation and checking.
+ESA=0,,,,1,0,, Causes the DCE to generate a 16-bit CRC in the
transmit direction in framed sub-Mode and check the CRC in the receive direction.
<crc_type> Values: 0 Disable CRC generation and checking.
1 In framed submode, the 16-bit CRC specified in V.42 is generated by the DCE
in the transmit direction and checked by the DCE in the receive direction.
Result Codes: OK
ERROR
+ETBM
Description:
Syntax:
Call Termination Buffer Management
Sets the behavior of the modem upon call termination. Only +ETBM=0,0,0 is a valid
combination. This means that the modem will discard all the buffered data when the
call is terminated.
AT+ETBM=<pending_TD>,<pending_RD>,<timer>
AT+ETBM=0,0,0
Values:
<pending_TD>
<pending_RD>
<timer>
0 specifies that disconnect will occur immediately and all buffered
transmit data will be discarded when the local DTE requests call
disconnection.
0 specifies that disconnect will occur immediately and all buffered
receive data will be discarded when the local DTE requests call
disconnection.
0 specifies that the modem will not attempt to deliver the buffered
data before abandoning the attempt and discarding remaining
data.
Reports :
Result Codes:
+ETBM? Reports current or selected options.
+ETBM=? Reports supported options.
OK
ERROR
Multi-Tech Systems, Inc. AT Commands for the MultiModem & SocketModem MT9234 Series (S000434H)
27
相关PDF资料
MT9234ZBA-USB MODEM V.92 DATA/FAX WORLD USB
MT9234ZPX-PCIE-CP MODEM V.92 DATA/FAX/VOICE WORLD
MT9M032I12STCH ES KIT HEAD BOARD FOR MT9M032
MT9T031P12STCH ES KIT HEAD BOARD FOR MT9T031
MT9V022I77ATMH ES KIT HEAD BOARD FOR MT9V022
MTCBA-C-N14-NAM MODEM CDMA RS-232 US ALLTEL
MTCBA-EN-AK-EU/GB KIT ACCY FOR ETH MODEMS EU/GB
MTFDDAA512MAM-1K1 SSD 1.8" SATA 512GB
相关代理商/技术参数
MT9234ZBA-V-EU 功能描述:MODEM V.92 DATA/FAX/VOICE WORLD RoHS:是 类别:计算机,办公室 - 元件,配件 >> 调制解调器 系列:MultiModem® ZBA 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34,V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H(145mm x 109mm x 25mm) 供应商设备封装:- 包装:散装
MT9234ZBA-V-GB/IE 功能描述:MODEM V.92 DATA/FAX/VOICE WORLD RoHS:是 类别:计算机,办公室 - 元件,配件 >> 调制解调器 系列:MultiModem® ZBA 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34,V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H(145mm x 109mm x 25mm) 供应商设备封装:- 包装:散装
MT9234ZBA-V-IEC 功能描述:MODEM V.92 DATA/FAX/VOICE WORLD RoHS:是 类别:计算机,办公室 - 元件,配件 >> 调制解调器 系列:MultiModem® ZBA 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34,V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H(145mm x 109mm x 25mm) 供应商设备封装:- 包装:散装
MT9234ZBA-V-NAM 功能描述:MODEM V.92 DATA/FAX/VOICE WORLD RoHS:是 类别:计算机,办公室 - 元件,配件 >> 调制解调器 系列:MultiModem® ZBA 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34,V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H(145mm x 109mm x 25mm) 供应商设备封装:- 包装:散装
MT9234ZBA-V-NPS-CP 制造商:Multi-Tech Systems 功能描述:V.92 VOICE/DATA/FAX WORLD MODEM (NO POWER SUPPLY) (25 MODEMS - Bulk
MT9234ZPX-PCIE 功能描述:MODEM V.92 WORLD PCI EXPRESS RoHS:是 类别:计算机,办公室 - 元件,配件 >> 调制解调器 系列:MultiModem® ZPX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34,V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H(145mm x 109mm x 25mm) 供应商设备封装:- 包装:散装
MT9234ZPX-PCIE-CP 功能描述:MODEM V.92 DATA/FAX/VOICE WORLD RoHS:是 类别:计算机,办公室 - 元件,配件 >> 调制解调器 系列:MultiModem® ZPX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34,V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H(145mm x 109mm x 25mm) 供应商设备封装:- 包装:散装
MT9234ZPX-PCIE-NV 制造商:Multi-Tech Systems 功能描述:V.92 DATA/V.34 FAX WORLD MODEM (PCI EXPRESS) - Bulk